23 replies to this topic

[Jamian]

Is "is continuation of previous string" unchecked? It should be. I've never understood what that was supposed to do, but if you have it checked it will prevent multiple strings from working.

Edited by Jamian, 21 March 2013 - 04:11 PM.

[Omega]

I did that however it is not working with the npc. Npc only says first string.

Did you set the argument for which string to display?

[Eskimojoe]

Is "is continuation of previous string" unchecked? It should be. I've never understood what that was supposed to do, but if you have it checked it will prevent multiple strings from working.

They are checked. If not checked then how would it know if it was a continuation or not?

And Franky yes I did however it will only allow for the setting of 1 string.

[MoscowModder]

Don't use "Is continuation...". I'm not sure exactly what it should do, but it's best to leave it off. Just setting the Next String from the first is enough.

[Eskimojoe]

Thanks Moscow that did the trick. Now I am also using signposts and there are two on my first screen. The first works no problem. The second not so well. BTW this is referencing Joe123s signpost script. The second is set up just like the first. Both have different strings. For the first one I set it to the "A" button. So I set the second one to the "B" button. Not sure what I have done wrong here.

[MoscowModder]

How is it not working? And why do you use different buttons for each sign?

[Eskimojoe]

I forgot of all things to declare which script the signpost was using. But it still only shows the first string and part of the second string all on the same page.

[MoscowModder]

Then you probably have "Is continuation..." checked on the second string. Un-check it.



Aaanndd.... that's what it does.

[Eskimojoe]

Thanks Moscow very much. Right once again! You are good at this.